We at R&M Precision Marine have more than 15 years of experience with anchor winches and maintain the best customer service and prices Australia wide.  

Come in and see a working display Viper S Series Rapid winch


47 Hammond St. Hamilton Vic. 

Viper S Series Rapid 1000W Electric Drum Anchor Winch

 PRICE $1,340


Wiring loom to suit $259.00 to $299.00

Winch fitting ( all models ) to your boat approx. $750.00 which includes required heavy duty wire with all terminals soldered.

Phone us on 03 55712115 for details.


"The First 316 Stainless Steel Marine Gearbox on a Drum Anchor Winch in Australia”

The Viper "S” Series RAPID has set new standards in anchoring systems. The new Viper 1000W electric motor (hand polished marine 316 grade stainless steel) has made it one of best selling anchor winch in Australia. With a fall rate of 50 meters per minute and a retrieval rate of 45 meters per minute the Viper will ensure you get onto your GPS mark, first time, every time!

With unsurpassed Viper reliability, it has more torque than a conventional drum winch, 3 support bearings hugging a 28mm one  (1) piece solid shaft and a 90 degree welded housing bracket which closes up the gap between your drum (preventing rope jams) and does not require any additional guards.

With a bullet proof 5-year Viper performance warranty, you can’t go past a Viper. Now supplied with everything you need to install it, including a 5mm stainless steel sandwich plate, all required stainless steel bolts/screws/nylocs/washers, 2 face plates depending on your dash space and even your rope chain and even swivel are included.

The Viper "S” Series RAPID 1000 All Stainless Steel Anchor Winch Bundle also Inc 100mtrs of 6mm Double Braid Rope, Pre-Spliced to 8mtrs of 6mm Gal Short Link Anchor Chain (Total 108mtrs Rope/Chain)

All you have to add is your own cabling or one of our custom made Bell Marine tinned copper marine wiring looms, you will never have to break your back pulling up your anchor and chain again!

Please note: 3B&S cables are already attached to our motor and leak tested, so there is no need to remove end caps that are not sealed properly!


  • 1000W Submersible Stainless Steel Electric Motor with IP68 Certification
  • 28mm Solid S/S Shaft With 3 Support Bearings
  • 8mm Marine Grade 316 Plate S/S Hand Polished to a Mirror Finish
  • Viper 316 Stainless Steel Marine Worm Drive Gear Box
  • 360 Degree Motor Rotation with 16 Different Positions
  • Max fall rate: 50mtrs per minute
  • Max Retrieval rate: 45 mtrs per minute
  • Suit Vessel Length: 5.7 mtrs +
  • Weight: 17 kgs (winch only)
  • Well Clearance Required: Width 395mm x depth 410mm x height 260mm

Above is a video of a similar winch to the VIPER Series

    Other Options

      Below winch is fitted in rope storage locker.

    Haines Hunter 550F installed by JV Marine

     Haines Hunter 495 Pro Fish installed by Bay Marine

     Below is on deck fitting

    Striper 230 Walk Around installed by Chelsea Yamaha

    Below is in anchor well fitting                    




    Below is 5 pictures of a Viper 1000 fitted on the same boat.

     Winch is out of sight when the anchor locker lid is closed.





    Winch fitting ( all models ) to your boat approx. $695.00 which includes required heavy duty wire with all terminals soldered.
    Extra charges:
    Bow sprit replacement for anchor clearance.
    Hawse pipe.
    Required structural alterations for winch fitting.
    Removal or relocation of existing fittings.
    Unusual difficulty in routing wiring.


     Viper Pro Marine Wiring Loom To Suit Boats

    Viper Pro Marine Wiring Loom to Suit Boats Up To 6.8mtrs – (Micro/1000)

    Price from $299.00          Part No. 30035