We at R&M Precision Marine have more than 15 years of experience with anchor winches and maintain the best customer service and prices Australia wide.


Come in and see a working display Viper Pro 1000 winch


47 Hammond St. Hamilton Vic.  


VIPER Pro Series"Micro" 1000

Viper Pro Series "Micro” 1000 Winch Bundle 60m double braid Rope & Chain Kit Plus Much More

Part No. 30038-6  RRP.$1449.00  (60mt. D/braid rope)
Part No. 30038-4  RRP.$1634.00  (100mt. Hi spec.3000 rope)

  Our Price $1265.00  Part No. 30038-6S (60mt. rope)
  Our Price $1455.00  Part No. 30038-4S (100mt. rope)
Wiring loom to suit $269.00 to $299.00
Chain sock to suit $38.00

Viper "S” Series MICRO 1000 All Stainless Steel Winch Bundle Inc 60m Rope & Chain Kit.  Part No. 30038-6S

Viper "S” Series MICRO 1000W All Stainless Steel Submersible Winch Bundle – One Of The World’s Most Powerful Winch For Its Size & Now With 316 Stainless Steel Marine Gearbox and IP68 Waterproof Certification!

Winch fitting ( all models ) to your boat approx. $750.00 which includes required heavy duty wire with all terminals soldered.

Extra charges:

Bow sprit replacement for anchor clearance.
Hawse pipe.
Required structural alterations for winch fitting.
Removal or relocation of existing fittings.
Unusual difficulty in routing wiring.

"The First 316 Stainless Steel Marine Gearbox on a Drum Anchor Winch in Australia”

Don’t be fooled by the name "MICRO” or by its size, this is one of the most powerful electric drum winch for its size and was designed to fit into bow riders, tinnies, walk-around’s, bass boats and any boat with restricted anchor well space or even none at all. When it comes to speed the Viper Micro is no sloth, it still houses the famous Viper 1000W electric motor (hand polished 316 stainless steel) and rotates its drum at speeds of up to 45mtrs per minute (fall rate) ensuring you get onto your GPS mark each and every time!

With unsurpassed Viper reliability, it has more torque than a conventional drum winch, 3 support bearings hugging a 1 piece solid shaft and a 90 degree welded housing bracket which closes up the gap between your drum (preventing rope jams) and does not require any additional guards. Constructed from 8mm plate 316 marine grade stainless steel (hand polished to a mirror finish) & comes std with a LIFE TIME warranty against water intrusion, and a bullet proof 5 YEAR Viper performance warranty, you can’t go past a Viper.

Now supplied with everything you need to install it, including a 5mm stainless steel sandwich plate, all required stainless steel bolts/screws/nylocs/washers, 2 face plates depending on your dash space and even your rope chain and even swivel are included.

Bundled with 60mtrs of 6mm double braid rope and pre spliced to 6mtr of gal 6mm short link chain ready to use!

Suits vessels from 4mtr right up to 8mtr and has no problem raising anchor sizes over 30lb or 15kgs with ease all day long!

All you have to add is your own cabling or one of our custom made Bell Marine tinned copper marine wiring looms and you will never have to break your back pulling up your anchor and chain again!

Please note: 3B&S cables are already attached to our motor and leak tested, so there is no need to remove end caps that are not sealed properly!



  • 28mm Solid S/S Shaft With 3 Support Bearings
  • 8mm Marine Grade 316 Plate S/S Hand Polished to a Mirror Finish
  • Full stainless Steel Worm Drive Viper Gear Box
  • 360 Degree Motor Rotation 16 Different Positions
  • 1 Mtr of 3 B&S Tinned Copper Cable Fitted & Leak tested
  • Max fall rate: 40mtrs per minute
  • Max retrieval rate: 36mtrs per minute
  • Suit vessel length: 4 mtrs +
  • Max load: 180kgs
  • Weight: 13kgs 
  • 5mm stainless steel sandwich plate -
  • All fixing hardware -
  • Installation notes & wiring diagram -                 

    You may also like…      



Viper Chain Sock To Suit 8mm Short Link Chain - 12mtrs Suit Pro 1500 Winch


Viper Chain Sock To Suit 6mm Short Link Chain – 8mtrs Suit Micro Winch


Part No. 30053


       Viper Pro Marine Wiring Loom To Suit Boats

Viper Pro Marine Wiring Loom to Suit Boats Up To 6.8mtrs – (Micro/1000)


Price from $299.00          Part No. 30035






 Photos above and below is the "Micro" model fitted into a tight anchor locker on a Haines Hunter. Part motor and gearbox had to be recessed into the side so to centre the drum.